Hayati Pro Max Plus 6000 Prefilled Pod Kit

The Hayati Pro Max Plus 6000 is the rechargeable prefilled pod kit from Hayati. It replaced the original Hayati Pro Max single-use device after the UK disposable ban in June 2025, keeping the 6,000-puff session in a kit you charge and refill.

Each kit comes with an 850mAh USB-C battery body, one 2ml prefilled pod, and one 10ml auto-fill cartridge. That delivers 12ml of 20mg nic salt e-liquid in total and approximately 6,000 puffs per refill set. Every kit is UK TPD compliant and MHRA registered.

The pod and cartridge click together as one unit and slot into the kit body. Draw activation fires the mesh coil, so there are no buttons or modes to learn. Pick your starter flavour, then top up from the Hayati Pro Max Plus refill range when the first set empties.

Key Features at a Glance

• 850mAh USB-C Rechargeable Battery - full charge in under an hour from flat
• Draw Activated Kit Body - no fire button, no modes, no settings to learn
• LED Battery Indicator - visible charge level on the kit body
• Reusable Kit Body - the battery stays, only the pod and cartridge replace
• Approximately 6,000 Puffs Per Refill Set - across the 2ml prefilled pod and 10ml auto-fill cartridge
• Auto-Fill Cartridge Mechanic - the 10ml cartridge feeds the 2ml pod automatically as you vape
• Mesh Coil Inside Every Pod - even heating, sharp flavour from first puff to last
• 20mg Nic Salt E-Liquid - sealed at the factory, UK TPD compliant, MHRA registered
• Mouth-to-Lung Draw - tight cigarette-style inhale, fixed airflow
• Over 45 Flavours in Stock - across the Hayati Pro Max Plus refill range

How the Auto-Fill Pod System Works

Each refill set is a two-part stack. A 2ml prefilled pod sits on top, with a 10ml auto-fill cartridge that locks underneath. The cartridge feeds e-liquid up into the pod automatically as you vape, so the pod stays primed without manual filling.

When both the pod and cartridge are dry, pull the spent unit out and click in a fresh pair. A new pod always brings a new mesh coil, so flavour stays sharp between swaps with no cleaning, no priming, no maintenance.

The Hayati Pro Max Plus 6000 is a refillable kit in the swap sense. You keep the rechargeable battery body for the long haul and rotate through fresh refill packs. The "auto-fill" name refers to the cartridge feeding the pod during use, not to filling the kit with your own bottled e-liquid.

850mAh USB-C Battery and Inhale Activation

An 850mAh built-in lithium battery powers the kit body. USB-C charging gets it from flat to full in under an hour through any standard cable plus a 5V wall adapter or laptop port.

Inhale activation handles the firing, with no fire button, no menu, and no modes to learn. Draw on the mouthpiece and the mesh coil fires. The LED on the kit body shows the remaining charge level at a glance.

A USB-C cable is not supplied with the kit and needs sourcing separately. The 850mAh capacity is sized to cover the full 12ml of e-liquid in each refill set with a top-up to spare.

Mesh Coil and 20mg Nic Salt

Every Hayati Pro Max Plus pod uses a built-in mesh coil paired with 20mg nic salt e-liquid. Mesh heats evenly across a wider surface area than older round-wire coils. Flavour clarity holds up from the first draw of a fresh pod to the last of the cartridge.

The fixed airflow is tuned for mouth-to-lung, the tight cigarette-style inhale most ex-smokers prefer. Nic salt at 20mg delivers a smooth, fast nicotine hit without the throat harshness of freebase liquids.

This kit is stocked in 20mg nic salt only - the 2ml prefilled pod and 10ml cartridge are TPD-locked at the 20mg salt strength. There is no 0mg or 10mg variant for the Pro Max Plus 6000 itself.

Setting Up Your Pro Max Plus 6000

1. Unbox the kit body and remove all protective seals.
2. Take the 2ml prefilled pod and 10ml cartridge from their sealed pack.
3. Click the pod onto the cartridge until both lock together as one unit.
4. Push the combined unit into the kit body until it clicks into place.
5. Give the kit a gentle shake and wait a minute for the coil to soak.
6. Draw on the mouthpiece to vape - inhale activated, no buttons.

Charge the kit via USB-C when the LED indicator drops low. If the kit ever feels off - weak draw, no fire, leaking, burnt taste - the Hayati Pro Max Plus 6000 troubleshooting guide walks through every common fix.

Hayati Pro Max Plus Flavours

Over 45 Hayati Pro Max Plus flavours are stocked across the refill range. Every pod uses 20mg nic salt with a built-in mesh coil, so the only choice is the profile that suits your taste. Most ex-smokers find a profile they like in the first pack.

Pick a starter flavour for the kit, or see every variant in the Hayati Pro Max Plus refill range across kit and refill packs.

[FLAVOURS_SECTION]

Hayati Pro Max Plus 6000 Specifications

Charging the Pro Max Plus 6000

The Pro Max Plus 6000 charges over USB-C through any standard cable plus a 5V wall adapter or laptop USB port. A full charge from a flat 850mAh battery takes under an hour.

The LED on the kit body shows the remaining level during use and while plugged in, so you can top up before the battery is empty. The 6,000-puff figure is the rated total across the full 12ml refill set with the kit fully charged, not per single charge.

A USB-C cable is not supplied with the kit and needs purchasing separately. Any standard phone-style USB-C cable plus a 5V adapter does the job.

What's in the Box

• 1 x Hayati Pro Max Plus 6000 kit body (850mAh rechargeable battery, LED indicator)
• 1 x 2ml prefilled pod (mesh coil, 20mg nic salt, chosen flavour)
• 1 x 10ml auto-fill cartridge (20mg nic salt, matched to the pod flavour)
• 1 x Instruction leaflet
• USB-C cable not included