SKE Crystal CL6000 Vape Kit

The SKE Crystal CL6000 is a rechargeable prefilled vape kit that gives you approximately 6,000 puffs from each pod set. You get an 800mAh battery and a dual mesh coil in every pod. The SKE 6000 puff kit splits 12ml of e-liquid between a 2ml pod and a 10ml refill container. This CL6000 vape kit is not a disposable. You recharge the battery and swap SKE Crystal CL6000 pods when the e-liquid runs out.

All 19 Crystal Bar flavours are available as Crystal CL6000 prefilled pods, each filled with 20mg nic salt e-liquid. This SKE Crystal 6000 puff vape is inhale activated with a fixed MTL draw and an LED display that shows your battery level. The crystal vape 6000 puffs kit comes in multiple colour options across the range.

Key Features

• Approximately 6,000 Puffs from 2ml pod plus 10ml refill container
• 800mAh Rechargeable Battery USB-C charging, 60 to 90 minutes from flat
• Dual Mesh Coil built into every pod for full flavour throughout
• LED Battery Display shows battery percentage in real time
• 20mg Nic Salt SKE Crystal e-liquid in all pods
• 19 Crystal Bar Flavours same flavours as the original Crystal Bar disposable
• Inhale Activated fixed MTL draw, no buttons
• Transparent Pod see your e-liquid level through the clear window

Crystal CL6000 Two-Piece Pod Assembly

The SKE Crystal CL6000 uses a two-piece pod design that's unique to this kit. A 2ml prefilled pod connects to a separate 10ml refill container, and both pieces slide into the kit as one unit. The 2ml pod holds the coil and mouthpiece. The 10ml container feeds e-liquid into the pod as you vape.

This two-piece layout is how the CL6000 vape gets approximately 6,000 puffs while staying TPD compliant. The 2ml pod meets UK regulations on its own, and the 10ml container sits separately as a refill supply. Together you get 12ml of e-liquid per pod set.

When the set runs empty, pull the whole assembly out and click in a fresh one from the SKE Crystal CL6000 refill pods range. Both pieces come pre-attached in every replacement pack.

Dual Mesh Coil and MTL Draw

Every Crystal CL6000 pod has a dual mesh coil fitted inside. Mesh heats e-liquid across a wider surface than round wire. The flavour holds up better from the first puff through to the end of the pod because of that wider contact area. You don't swap or prime coils on this kit. Each replacement pod set comes with a fresh dual mesh coil built in.

The draw on the SKE Crystal CL6000 vape is fixed MTL with tight airflow. If you used Crystal Bar disposables before the ban, the pull on this cl6000 vape kit feels the same. Inhale activated too, so there's no fire button.

800mAh Battery and LED Display

The SKE Crystal CL6000 pod kit runs on an 800mAh battery. USB-C charging takes 60 to 90 minutes from flat to full. One charge gets most vapers through a full day on MTL use. The battery holds enough to work through most of a crystal 6000 vape pod set before needing a top up.

The LED display on the front of the CL6000 shows your battery percentage as you vape. Unlike the old Crystal Bar 600 disposables that just stopped working without warning, you can see exactly when to plug in.

Crystal Bar CL6000 Disposable Replacement

If you've been searching for "SKE Crystal CL6000 disposable vape", this is a rechargeable pod kit, not a disposable. SKE Crystal Bar disposables were banned in June 2025 under UK single-use vape legislation. The Crystal CL6000 is the rechargeable replacement that keeps the same Crystal Bar flavours and the same MTL draw.

The difference is you recharge the battery and swap pods instead of throwing the whole vape away. The SKE Crystal CL6000 prefilled pod kit lasts approximately as long as several Crystal Bar 600 disposables combined. Our guide to switching from disposable vapes to pod kits covers what to expect if you're making the move.

SKE Crystal CL6000 Flavours

All 19 Crystal Bar flavour editions work with the SKE Crystal CL6000 kit. Each pod set comes prefilled with 20mg nic salt e-liquid and a dual mesh coil built in.

[FLAVOURS_SECTION]

Shane: confirm flavour count. Existing content says 19. If it matches the 24 from the 600 Pro range, update all references.

SKE Crystal CL6000 Specifications

How to Set Up the SKE Crystal CL6000

Setting up the SKE Crystal CL6000 vape kit takes a couple of minutes. The two-piece pod assembly needs connecting before it goes into the kit.

1. Take the SKE Crystal CL6000 kit out of the box
2. Remove the rubber plugs from both the pod and the refill container
3. Push the 10ml refill container into the base of the 2ml pod until it clicks
4. Slide the connected pod assembly into the top of the CL6000 kit until secure
5. Inhale through the mouthpiece to start vaping
6. Check the LED display for battery percentage
7. Plug in a USB-C cable when the battery runs low (cable not included)

Replacing Pods

1. Pull the empty pod and container assembly out of the kit
2. Push in a fresh set from the SKE Crystal CL6000 pods range
3. Inhale to start vaping with no priming needed

What's in the Box?

• 1x SKE Crystal CL6000 Vape Kit (800mAh battery)
• 1x 2ml Prefilled Pod with dual mesh coil (pre-installed)
• 1x 10ml Prefilled Refill Container (20mg nic salt e-liquid)
• 1x User Manual
• USB-C cable NOT included