{"product_id":"vaporesso-skrr-coils-qf-mesh-qf-strip","title":"Vaporesso SKRR Coils QF Mesh QF Strip","description":"\u003ch2\u003eVaporesso SKRR QF Coils\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Browse the full Vaporesso vape range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso\u003c\/a\u003e SKRR QF coils are the replacement coils for the Vaporesso SKRR and SKRR-S sub-ohm tanks, the high-wattage tanks that shipped with the legacy Revenger, Revenger X, Polar and original Luxe sub-ohm kits.\u003c\/p\u003e\n\u003cp\u003e Two resistances are available: a 0.15 ohm QF Strip and a 0.2 ohm QF Mesh.\u003c\/p\u003e\n\u003cp\u003eBoth coils run in the 60-90W direct-to-lung wattage range these kits were designed for.\u003c\/p\u003e\n\u003cp\u003eIf your kit has a SKRR or SKRR-S tank screwed on top, these are the correct replacement coils. The original kits are no longer manufactured by Vaporesso, but Ecigone keeps QF coil stock so customers running the original hardware can keep it going. For newer Vaporesso kits like the Luxe X3 or Armour G, see the alternative coil platforms section further down.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Resistance Options\u003c\/strong\u003e - 0.15 ohm QF Strip and 0.2 ohm QF Mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-90W Sub-Ohm DTL\u003c\/strong\u003e - built for the original SKRR \/ SKRR-S wattage window\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Fit Install\u003c\/strong\u003e - plug-and-play swap into the SKRR or SKRR-S tank base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQF Strip Element\u003c\/strong\u003e - even-heating flat strip for a smoother flavour profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQF Mesh Element\u003c\/strong\u003e - larger surface area for denser vapour and brighter flavour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-VG Tuned\u003c\/strong\u003e - pairs best with 70VG or higher \u003ca title=\"Browse 70VG shortfill e-liquids at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeak-Resistant Top Seal\u003c\/strong\u003e - reduces flooding and spitback in the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Coils Per Pack\u003c\/strong\u003e - keep spares on rotation between orders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSKRR Coil Compatibility\u003c\/h2\u003e\n\u003cp\u003eVaporesso SKRR QF coils fit the Vaporesso SKRR and SKRR-S sub-ohm tanks.\u003c\/p\u003e\n\u003cp\u003e If your kit shipped with a SKRR or SKRR-S tank, these coils are the replacement you need.\u003c\/p\u003e\n\u003cp\u003eThey do not fit any of the newer Vaporesso pod platforms such as GTX, GTi or COREX, and they do not fit the older GTR or NRG tanks either - each Vaporesso coil family has its own socket.\u003c\/p\u003e\n\u003ch3\u003eCompatible Tanks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVaporesso SKRR sub-ohm tank\u003c\/li\u003e\n\u003cli\u003eVaporesso SKRR-S sub-ohm tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Kits (Legacy - No Longer Manufactured)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVaporesso Revenger kit\u003c\/li\u003e\n\u003cli\u003eVaporesso Revenger X kit\u003c\/li\u003e\n\u003cli\u003eVaporesso Polar kit\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe kit (original sub-ohm version, not the Luxe X pod kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuick check: unscrew the tank from your mod and look at the coil head. If the threading on the coil matches a QF coil and the tank is engraved SKRR or SKRR-S, these are the correct replacements.\u003c\/p\u003e\n\u003ch2\u003eQF Strip vs QF Mesh Coils\u003c\/h2\u003e\n\u003cp\u003eBoth coils fit the same SKRR and SKRR-S tank, both run in the same 60-90W range, and both work best with high-VG shortfill e-liquid. The difference is in how the heating element is built.\u003c\/p\u003e\n\u003cp\u003eThe 0.15 ohm QF Strip uses a flat strip element that heats evenly along its length. The result is a smoother, more rounded flavour profile and a slightly tighter cloud. It runs a little warmer at the same wattage and tends to be the preferred choice for vapers who want flavour clarity over sheer cloud size.\u003c\/p\u003e\n\u003cp\u003eThe 0.2 ohm QF Mesh uses a wider mesh element with more surface area in contact with the wick. Vapour production is denser and the flavour profile is brighter, especially in the upper half of the wattage range. It is the more cloud-focused of the two coils.\u003c\/p\u003e\n\u003cp\u003eBoth pair best with a 70VG or higher shortfill. Nicotine salts and 50\/50 freebase liquids are too thin for these coils and will wick poorly at this wattage.\u003c\/p\u003e\n\u003ch2\u003eSKRR Coil Resistance Guide\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm QF Strip\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e65-85W (sweet spot approximately 75W)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSmooth, even-heating, balanced flavour\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG+ shortfill, fruit and dessert blends\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm QF Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-80W (sweet spot approximately 70W)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eDenser vapour, brighter flavour at higher wattage\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG+ shortfill, menthol and fruit blends\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstalling a New SKRR Coil\u003c\/h2\u003e\n\u003cp\u003eUnscrew the tank base from the glass, pull the old coil straight out and press the new coil into the base socket.\u003c\/p\u003e\n\u003cp\u003e Re-attach the glass and fill the tank with your chosen shortfill.\u003c\/p\u003e\n\u003cp\u003e Saturate the wick ports through the side of the coil with a few drops of e-liquid, then stand the tank upright for 5-10 minutes so the cotton wicks through fully.\u003c\/p\u003e\n\u003cp\u003eStart at the lower end of the wattage range, take a few short pulls, then ramp the wattage up to your preferred setting.\u003c\/p\u003e\n\u003ch2\u003eAlternative Coil Platforms\u003c\/h2\u003e\n\u003cp\u003eIf your kit does not use a SKRR or SKRR-S tank, you need a different coil family. Vaporesso has moved on through several coil platforms since the QF range and the newer pod-based kits use their own dedicated coils.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Luxe X3, Armour G, Armour GS and GTX One Pro pod kits: \u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor iTank-based mod kits including the Armour Ultra: \u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eVaporesso GTi Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor the legacy GTR sub-ohm tank: \u003ca title=\"Shop Vaporesso GTR replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtr-replacement-coils\"\u003eVaporesso GTR Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor older NRG-series sub-ohm tanks: \u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eVaporesso GT Mesh Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTX, GTi and COREX coils are not interchangeable with QF coils and will not fit a SKRR or SKRR-S tank.\u003c\/p\u003e\n\u003ch2\u003eSKRR Coil Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eSpec\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Family\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eQF (SKRR \/ SKRR-S)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistances\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm QF Strip, 0.2 ohm QF Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWattage Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-90W\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVape Style\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSub-ohm direct-to-lung\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eRecommended E-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG or higher shortfill\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCompatible Tanks\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso SKRR, Vaporesso SKRR-S\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eInstall\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003ePress-fit, no threading\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003ePack Size\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e3 coils per pack\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x Vaporesso SKRR QF Replacement Coils (0.15 ohm QF Strip or 0.2 ohm QF Mesh, variant of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVaporesso SKRR QF coils sit within the wider \u003ca title=\"Browse the full Vaporesso replacement coil range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e at Ecigone, alongside \u003ca title=\"Browse Vaporesso replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-pods\"\u003eVaporesso replacement pods\u003c\/a\u003e and the full \u003ca title=\"Browse the complete Vaporesso vape collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther Vaporesso Coils to Consider\u003c\/h2\u003e\n\u003cp\u003eIf your tank is not a SKRR or SKRR-S, these adjacent Vaporesso coil ranges may be the right fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX Coils\u003c\/a\u003e for Luxe X3, Armour G, Armour GS and GTX One Pro\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eVaporesso GTi Coils\u003c\/a\u003e for iTank 2 and iTank T sub-ohm tanks\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eVaporesso GT Mesh Coils\u003c\/a\u003e for older NRG-series sub-ohm tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VAPORESSO","offers":[{"title":"0.15OHM","offer_id":53607225819474,"sku":"E050143CV501S","price":4.16,"currency_code":"GBP","in_stock":true},{"title":"0.2OHM","offer_id":53607225852242,"sku":"E050121CV501S","price":4.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/2364\/3730\/files\/vaporesso-skrr-coils-qf-meshed-qf-strip-0.2-ohm.webp?v=1780182621","url":"https:\/\/www.vapesmoke.co.uk\/products\/vaporesso-skrr-coils-qf-mesh-qf-strip","provider":"Vape Smoke","version":"1.0","type":"link"}