XROS 5 Pod Vape Kit by Vaporesso

The Vaporesso XROS 5 is the everyday flagship of the XROS series, built around a 1500mAh battery, a 0.88-inch HD colour display, 5-30W adjustable output and the latest COREX 3.0 mesh pods. Two refillable pods come with the kit at 0.6 ohm and 0.8 ohm, covering looser RDL and tighter MTL straight from the box. It sits at the centre of the wider Vaporesso XROS range, with the smaller Mini and Nano models stepping down and the XROS Pro 2 stepping up.

Where the XROS 5 separates itself from the rest of the family is the combination of three power modes, full adjustable wattage, the 0.88-inch HD colour screen and 14 finishes including the Leather Edition lineup. The 1500mAh battery is approximately 50% larger than the XROS 4, holding a full day of MTL vaping on a single charge with manufacturer figures rating up to 5 days of light use. Built by Vaporesso (SMOORE) and supplied as genuine UK stock under TPD compliance.

Key Features

• 1500mAh Battery - approximately 50% larger than the XROS 4, full-day MTL use
• 5-30W Adjustable Wattage - three power modes across Eco, Smart and Pulse
• 0.88-inch HD Colour Display - battery, wattage, resistance, puff count, themes
• COREX 3.0 Hive Mesh Pods - 0.6 ohm and 0.8 ohm in the box, 2ml refill capacity
• Full XROS Pod Compatibility - every Vaporesso XROS pod 0.4 ohm to 1.2 ohm fits
• Adjustable Airflow Slider - tight MTL through to looser RDL on one device
• USB-C 3A Super-Charging - fast charge from flat to full in under 40 minutes
• 14 Finishes Including Leather Edition - Leather, Silk, Opal and Standard families

1500mAh Battery and 3A USB-C Super-Charging

The XROS 5 carries a 1500mAh internal battery, roughly a 50% increase on the XROS 4. Most MTL vapers should see a full day of vaping from a single charge, with light use approximately stretching that further across two days or more. USB-C 3A super-charging brings the battery from flat to full in under 40 minutes, with an 80% top-up reached noticeably faster than the older 2A standard. Battery percentage shows on the HD display so you always know where the kit stands.

0.88-inch HD Colour Display with Multiple Themes

The 0.88-inch HD screen cycles through wattage, battery percentage, pod resistance and a live puff counter, with multiple colour themes to swap between. The XROS 5 also remembers the last wattage setting for each pod resistance, so swapping between the 0.6 ohm and 0.8 ohm pods does not mean resetting the kit every time.

5-30W Adjustable Wattage with Three Power Modes

The XROS 5 covers a full 5W to 30W adjustable wattage range through three dedicated power modes, accessed through the fire button. This is the spec that separates the flagship XROS 5 from the smaller Mini and Nano models, which run more limited adjustment.

Smart mode is the easiest pick if you swap between pod resistances often, since the XROS 5 sets the wattage on its own.

Hive Mesh Refill Pods Included

Two COREX 3.0 pods come with the XROS 5 - a 0.6 ohm for restricted direct-lung and a 0.8 ohm for tighter MTL. The Hive Mesh holds flavour longer than the older COREX 2.0 coils, particularly through the back end of the coil's life where cheaper pods tend to drop off. Each pod holds 2ml of e-liquid under UK TPD compliance and clicks back into the chassis magnetically.

XROS Pod Range Compatibility

Every Vaporesso XROS pod ever made fits the XROS 5, including both the original COREX 2.0 pods and the newer COREX 3.0 Hive Mesh pods. Pod shell, magnetic connector and cradle are universal across the XROS family - the difference between the two generations is the coil technology inside the pod, not pod fit. COREX 3.0 reads approximately 40% richer in flavour with longer coil life, while COREX 2.0 sits a touch warmer with a wider resistance ladder running from 0.4 ohm right up to 1.2 ohm.

Adjustable Airflow MTL to RDL

An airflow slider sits on the side of the chassis, taking the XROS 5 from tight MTL all the way to a looser RDL draw. Close it right down for a cigarette-style pull on 20mg nic salts, open it up for more vapour on 50/50 freebase or shortfill e-liquid.

How to Use the Vaporesso XROS 5

Getting started with the XROS 5 takes a few minutes from box to first puff.

1. Charge the kit fully via USB-C before first use - approximately 35-40 minutes from flat.
2. Pull the pre-installed 0.6 ohm COREX 3.0 pod out of the chassis, lift the silicone fill plug on the side and fill with up to 2ml of e-liquid.
3. Replace the plug, slot the pod back into the chassis - the magnetic connector clicks it into place - and stand the kit upright for 5 minutes to let the coil prime.
4. Adjust the airflow slider on the side of the chassis for a tighter MTL or looser RDL draw.
5. Tap the fire button to wake the screen, set wattage between 5W and 30W or pick Smart mode to let the kit set itself, then inhale on the mouthpiece - auto-draw and manual fire both work.

XROS 5 Colours and Leather Edition

The Vaporesso XROS 5 comes in 14 finishes across four families - Leather Edition, Silk, Opal and Standard. The Leather Edition lineup wraps the aluminium chassis in a textured leather-style panel for a more refined hand-feel and a softer grip than the painted finishes, with all four Leather variants running the same 1500mAh battery, COREX 3.0 pods and 0.88-inch HD screen as the rest of the XROS 5 range.

Specifications

What's in the Box

• 1x Vaporesso XROS 5 Device
• 1x 0.6 ohm COREX 3.0 Pod (pre-installed)
• 1x 0.8 ohm COREX 3.0 Pod
• 1x USB-C Charging Cable
• 1x User Manual