{"title":"Vaporesso Coils","description":"","products":[{"product_id":"vaporesso-gtx-coil-5pcs","title":"Vaporesso GTX Replacement Coils","description":"\u003ch2\u003eVaporesso GTX Mesh and Dual Mesh Coils\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Browse the full Vaporesso vape range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso\u003c\/a\u003e GTX coils are mesh replacement coils that fit a wide range of Vaporesso pod kits, sub-ohm tanks and pod-mod hybrids. The GTX range covers ten resistance options from 0.15 ohm right up to 1.2 ohm, with standard mesh and dual mesh builds on the lower-ohm side. Every pack contains five coils, which makes GTX one of the best-stocked replacement coil platforms in the wider \u003ca title=\"Browse the full Vaporesso replacement coil collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSeven options use a single mesh strip (0.15 ohm to 1.2 ohm) covering DTL, RDL and MTL vaping.\u003c\/p\u003e\n\u003cp\u003e Three low-ohm resistances (0.15 ohm, 0.2 ohm and 0.3 ohm) are also available as dual mesh, which layers two mesh strips side by side to push more flavour and vapour at the same wattage.\u003c\/p\u003e\n\u003cp\u003eTriple silicone O-rings cut down on leaking, while flax fibre and cotton wicking soaks e-liquid faster than cotton on its own.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTen GTX resistance options from 0.15 ohm to 1.2 ohm covering DTL, RDL and MTL\u003c\/li\u003e\n\u003cli\u003eStandard mesh and dual mesh builds, with dual mesh available in 0.15 ohm, 0.2 ohm and 0.3 ohm\u003c\/li\u003e\n\u003cli\u003eDual mesh delivers richer flavour and bigger clouds at the same resistance\u003c\/li\u003e\n\u003cli\u003eTriple silicone O-rings reduce pod and tank leaking\u003c\/li\u003e\n\u003cli\u003eFlax fibre and cotton wicking soaks quickly to reduce dry hits\u003c\/li\u003e\n\u003cli\u003eCompatible with the \u003ca title=\"Shop the Vaporesso GTX One Pro vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-one-pro-vape-kit\"\u003eGTX One Pro kit\u003c\/a\u003e, \u003ca title=\"Shop the Vaporesso Armour G pod kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-g-pod-vape-kit\"\u003eArmour G\u003c\/a\u003e, \u003ca title=\"Shop the Vaporesso Armour GS pod kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-gs-pod-vape-kit\"\u003eArmour GS\u003c\/a\u003e, \u003ca title=\"Shop the Vaporesso Luxe X3 pod kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-luxe-x3-pod-vape-kit\"\u003eLuxe X3\u003c\/a\u003e and more\u003c\/li\u003e\n\u003cli\u003ePress-fit fitment, push the coil in with no threading or screwing\u003c\/li\u003e\n\u003cli\u003eNiCr mesh for low-ohm sub-ohm coils, FeCrAl mesh for higher-ohm MTL coils\u003c\/li\u003e\n\u003cli\u003e5 GTX coils per pack across every resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0302\/7002\/9869\/files\/Vaporesso-GTX-Coils-Specification-1.webp?v=1743697344\" alt=\"Vaporesso GTX replacement mesh coil showing the press-fit body, mesh strip and flax fibre wicking\"\u003e\u003c\/p\u003e\n\u003ch2\u003eGTX Coil Compatibility\u003c\/h2\u003e\n\u003cp\u003eVaporesso GTX coils fit a broad set of Vaporesso pod kits, sub-ohm tanks and pod-mod hybrids that share the GTX coil socket. If your kit takes a GTX coil, every resistance listed presses straight in without an adapter.\u003c\/p\u003e\n\u003ch3\u003eCurrently Stocked Compatible Kits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso GTX One Pro vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-one-pro-vape-kit\"\u003eVaporesso GTX One Pro\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso Armour G pod vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-g-pod-vape-kit\"\u003eVaporesso Armour G\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso Armour GS pod vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-gs-pod-vape-kit\"\u003eVaporesso Armour GS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso Luxe X3 pod vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-luxe-x3-pod-vape-kit\"\u003eVaporesso Luxe X3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso Luxe XR Max 2 pod vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-luxe-xr-max-2-vape-kit\"\u003eVaporesso Luxe XR Max 2\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Tanks and Pods\u003c\/h3\u003e\n\u003cp\u003eGTX coils also fit the \u003ca title=\"Shop the Vaporesso xTank T sub-ohm vape tank at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-xtank-t-vape-tank\"\u003exTank T\u003c\/a\u003e sub-ohm tank that ships on the GTX One Pro, the \u003ca title=\"Shop Vaporesso Luxe XR replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-luxe-xr-replacement-pods\"\u003eLuxe XR replacement pods\u003c\/a\u003e, and the \u003ca title=\"Shop Vaporesso Armour G and GS replacement pod cartridges at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-g-gs-replacement-pod-cartridge\"\u003eArmour G\/GS pod cartridges\u003c\/a\u003e. The newer GTX-2 versions (marked on the packaging) have improved O-ring seals but fit the exact same kits and tanks.\u003c\/p\u003e\n\u003ch3\u003eImportant - GTX Does NOT Fit COREX Pods\u003c\/h3\u003e\n\u003cp\u003eGTX coils do NOT fit the COREX pod platform used on the Vaporesso XROS family or the Luxe X COREX 2.0 pods. Those use an integrated COREX coil built into the pod, not a removable coil head. If your pod kit has integrated coils inside the pod body, you are on the COREX platform and need replacement pods rather than replacement coils.\u003c\/p\u003e\n\u003ch2\u003eMesh vs Dual Mesh GTX Coils\u003c\/h2\u003e\n\u003cp\u003eThree resistances (0.15 ohm, 0.2 ohm and 0.3 ohm) come in both standard mesh and dual mesh builds. The remaining seven resistances are standard mesh only.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eStandard Mesh\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDual Mesh\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eMesh Layers\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eOne\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eTwo\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistances\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eAll ten (0.15-1.2 ohm)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eThree (0.15, 0.2, 0.3 ohm)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVaping Style\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eDTL, RDL, MTL\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eDTL only\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eE-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eNic salts, 50\/50, high VG\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG only\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDual mesh delivers richer flavour and more vapour at the same resistance because the two layers heat more e-liquid at once. If you vape DTL at 0.2 ohm and want a bit more from every hit, the dual mesh is the upgrade. Standard mesh still pulls plenty of flavour and tends to last a touch longer on the same bottle.\u003c\/p\u003e\n\u003ch2\u003eGTX Coil Resistance Guide\u003c\/h2\u003e\n\u003ch3\u003eDTL Coils (0.15 ohm to 0.3 ohm)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eCoil\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-75W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, max VG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e45-60W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.3 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e32-45W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Dual Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-75W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, max VG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Dual Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e45-60W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Dual Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.3 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e32-45W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe low-resistance GTX coils (0.15-0.3 ohm) use NiCr mesh for fast ramp-up.\u003c\/p\u003e\n\u003cp\u003eThe 0.2 ohm is the most popular GTX coil resistance, sitting in the middle of the DTL range and pairing well with 70\/30 or max VG \u003ca title=\"Browse 70VG shortfill e-liquids at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e at 45-60W.\u003c\/p\u003e\n\u003ch3\u003eRDL Coils (0.4 ohm to 0.6 ohm)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eCoil\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.4 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e26-32W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e50\/50, high VG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.6 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e20-26W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eNic salts, 50\/50\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eRDL coils use FeCrAl mesh.\u003c\/p\u003e\n\u003cp\u003e The 0.4 ohm sits between DTL and MTL - loose enough for a relaxed draw but tight enough for nic salts at 20mg if you prefer a warmer vape.\u003c\/p\u003e\n\u003cp\u003eThe 0.6 ohm runs cooler and suits nic salts or 50\/50 e-liquids.\u003c\/p\u003e\n\u003ch3\u003eMTL Coils (0.8 ohm to 1.2 ohm)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eCoil\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.8 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e12-16W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eNic salts, 50\/50\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGTX Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e1.2 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e7-11W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eNic salts, high PG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMTL coils also use FeCrAl mesh. The 1.2 ohm is the tightest draw in the GTX range, closest to a cigarette pull, and best with \u003ca title=\"Browse the Ecigone nic salt e-liquid range\" href=\"https:\/\/ecigone.co.uk\/collections\/nic-salt-e-liquids\"\u003enic salt e-liquids\u003c\/a\u003e at 10mg or 20mg. The 0.8 ohm opens the draw up a touch for vapers who want MTL with a little more air.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0302\/7002\/9869\/files\/Vaporesso-GTX-Coils-Specification-3.webp?v=1743697344\" alt=\"Vaporesso GTX coil resistance range from 0.15 ohm to 1.2 ohm with matched wattage bands for DTL, RDL and MTL vaping\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstalling a New GTX Coil\u003c\/h2\u003e\n\u003cp\u003eGTX coils are press-fit, so there is no threading or screwing involved. Take the pod or tank off the battery, remove the old coil with a firm pull, and push the new GTX coil straight into the base until it clicks.\u003c\/p\u003e\n\u003cp\u003e Drip three or four drops of e-liquid directly onto the exposed mesh and cotton ports on the side of the coil, then refill the pod or tank. Let the new coil sit for five to ten minutes so the wicking can soak through. When you start vaping, begin at the lower end of the recommended wattage range and step the power up gradually.\u003c\/p\u003e\n\u003cp\u003eA short break-in at lower wattage gives the coil a longer life and a cleaner flavour from the first puff.\u003c\/p\u003e\n\u003ch2\u003eGTX Coil Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eSpec\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Types\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eStandard mesh, dual mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistances\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15, 0.2, 0.3, 0.4, 0.6, 0.8, 1.2 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eDual Mesh Options\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15, 0.2, 0.3 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWattage Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e7-75W (varies by resistance)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eMesh Material\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eNiCr (low ohm), FeCrAl (high ohm)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWicking\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eFlax fibre and cotton\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eLeak Protection\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eTriple silicone O-rings\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eFitment\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003ePress-fit, no threading\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVaping Styles\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eDTL, RDL, MTL\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eE-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eNic salts, 50\/50, high VG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003ePack Size\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e5 coils\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x Vaporesso GTX Replacement Coils (in your chosen resistance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVaporesso GTX coils sit within the wider \u003ca title=\"Browse the full Vaporesso replacement coil range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e at Ecigone, alongside \u003ca title=\"Shop Vaporesso replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-pods\"\u003eVaporesso replacement pods\u003c\/a\u003e and the full \u003ca title=\"Browse the complete Vaporesso vape collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso collection\u003c\/a\u003e of kits and accessories.\u003c\/p\u003e\n\u003ch2\u003eOther Vaporesso Coils to Consider\u003c\/h2\u003e\n\u003cp\u003eIf your kit is not on the GTX platform, these adjacent Vaporesso coil ranges may be the right fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eVaporesso GTi Coils\u003c\/a\u003e for iTank 2 and iTank T sub-ohm tanks\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTR replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtr-replacement-coils\"\u003eVaporesso GTR Coils\u003c\/a\u003e for legacy GTR tanks\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eVaporesso GT Mesh Coils\u003c\/a\u003e for older NRG-series sub-ohm tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VAPORESSO","offers":[{"title":"MESH 0.15OHM","offer_id":53607017742674,"sku":"E8965M01CV01S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"MESH 0.2OHM","offer_id":53607017775442,"sku":"E12542499CS1869S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"MESH 0.3OHM","offer_id":53607017808210,"sku":"E8966M03CV03S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"MESH 0.4OHM","offer_id":53607017840978,"sku":"E8967M04CV04S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"MESH 0.6OHM","offer_id":53607017873746,"sku":"E12543240CV2786S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"MESH 0.8OHM","offer_id":53607017906514,"sku":"E12543241CV2787S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"MESH 1.2OHM","offer_id":53607017939282,"sku":"E9631M12CV08S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"0.15OHM DUAL MESH","offer_id":53607017972050,"sku":"E3532801DCV08S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"0.2OHM DUAL MESH","offer_id":53607018004818,"sku":"E3532902DCV09S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"0.3OHM DUAL MESH","offer_id":53607018037586,"sku":"E3533003DCV10S","price":8.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/2364\/3730\/files\/vaporesso-gtx-replacement-mesh-coils-0.2-ohm.webp?v=1780180637"},{"product_id":"vaporesso-gti-replacement-coils","title":"Vaporesso GTi Replacement Coils","description":"\u003ch2\u003eVaporesso GTi Lattice Mesh Coils\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Browse the full Vaporesso vape range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso\u003c\/a\u003e GTi coils are sub-ohm lattice mesh replacement coils built for the iTank 2 and \u003ca title=\"Shop the Vaporesso iTank T sub-ohm vape tank at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-itank-t-sub-ohm-tank\"\u003eiTank T\u003c\/a\u003e sub-ohm tanks.\u003c\/p\u003e\n\u003cp\u003e The GTi range covers six SKUs across two mesh builds - four standard lattice mesh resistances (0.15, 0.2, 0.4 and 0.5 ohm) and two dual mesh options (0.2 and 0.4 ohm).\u003c\/p\u003e\n\u003cp\u003e The lattice mesh weave is the key engineering choice on every GTi coil.\u003c\/p\u003e\n\u003cp\u003eInstead of a single flat strip, the wire is woven into a tighter cross-hatch grid, which spreads heat evenly across the cotton, slows down coil burnout, and keeps flavour clean from the first puff through to the last drop of e-liquid in the tank.\u003c\/p\u003e\n\u003cp\u003eGTi is Vaporesso's iTank sub-ohm DTL and RDL platform - every coil in the range sits under 1 ohm and runs best with high-VG e-liquid, including 70\/30 and max VG \u003ca title=\"Browse 70VG shortfill e-liquids at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/shortfill-e-liquids\"\u003eshortfills\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e If you have a Vaporesso \u003ca title=\"Shop the Vaporesso Armour Ultra vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-ultra-vape-kit\"\u003eArmour Ultra\u003c\/a\u003e kit, \u003ca title=\"Shop the Vaporesso Armour Ultra mod at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-ultra-mod\"\u003eArmour Ultra mod\u003c\/a\u003e, or any other Vaporesso kit paired with an iTank 2 or iTank T, these are the correct replacement coils.\u003c\/p\u003e\n\u003cp\u003e The dual mesh variants (0.2 and 0.4 ohm) add a second mesh layer at the same resistance as their standard counterparts, which means richer vapour density without dropping ohms.\u003c\/p\u003e\n\u003cp\u003eEvery resistance ships in a 5-pack for proper stock cover between orders.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLattice Mesh Build\u003c\/strong\u003e - cross-hatch mesh weave for even heat spread, cleaner flavour and longer coil life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix Resistance Options\u003c\/strong\u003e - 0.15, 0.2, 0.4 and 0.5 ohm standard mesh plus 0.2 and 0.4 ohm dual mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard or Dual Mesh\u003c\/strong\u003e - dual mesh adds a second heating layer for thicker vapour at the same resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-Ohm Focus\u003c\/strong\u003e - DTL and RDL vaping styles, not designed for MTL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-VG Tuned\u003c\/strong\u003e - works best with 70\/30 and max VG shortfill e-liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eiTank 2 and iTank T Fit\u003c\/strong\u003e - press-fits into either Vaporesso sub-ohm tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Fit Install\u003c\/strong\u003e - push in, no threading, no tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Pack\u003c\/strong\u003e - every resistance sold in fives for stock cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0302\/7002\/9869\/files\/Vaporesso-GTi-Coils-Specification-1.webp?v=1743757636\" alt=\"Vaporesso GTi lattice mesh coils 0.2 ohm 60-75W and 0.4 ohm 50-60W side by side\"\u003e\u003c\/p\u003e\n\u003ch2\u003eGTi Coil Compatibility\u003c\/h2\u003e\n\u003cp\u003eVaporesso GTi coils fit the iTank 2 and iTank T sub-ohm tanks.\u003c\/p\u003e\n\u003cp\u003e Any current Vaporesso mod kit that ships with one of those tanks - including the Armour Ultra kit and Armour Ultra mod - takes GTi coils.\u003c\/p\u003e\n\u003cp\u003e The GTi platform is sub-ohm only, so the resistance range tops out at 0.5 ohm, there is no MTL coil in the range, and no 0.3 ohm option either.\u003c\/p\u003e\n\u003cp\u003eIf your Vaporesso kit came with an iTank 2 or iTank T screwed on the mod, you are on the GTi platform.\u003c\/p\u003e\n\u003ch3\u003eCurrently Stocked Compatible Kits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso Armour Ultra vape kit at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-ultra-vape-kit\"\u003eVaporesso Armour Ultra Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso Armour Ultra mod at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-armour-ultra-mod\"\u003eVaporesso Armour Ultra Mod\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Tanks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVaporesso iTank 2 sub-ohm tank\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Shop the Vaporesso iTank T sub-ohm vape tank at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-itank-t-sub-ohm-tank\"\u003eVaporesso iTank T sub-ohm tank\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTi coils do not fit Vaporesso GTX pod kits like the Luxe X3, Armour G, Armour GS or GTX One Pro. Those use the GTX platform instead - see the \u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX coils page\u003c\/a\u003e for the GTX range.\u003c\/p\u003e\n\u003ch2\u003eGTi vs GTX Coils\u003c\/h2\u003e\n\u003cp\u003eGTi and GTX are two separate Vaporesso coil platforms and they are not cross-compatible. \u003cstrong\u003eGTi\u003c\/strong\u003e coils use a lattice mesh build, sit between 0.15 ohm and 0.5 ohm, and only fit the iTank 2 and iTank T sub-ohm tanks - so they are tied to mod-and-tank kits like the Armour Ultra.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eGTX\u003c\/strong\u003e coils come in a much wider resistance spread (covering MTL options as high as 1.2 ohm right through to 0.15 ohm sub-ohm) and fit Vaporesso's pod kits including the Luxe X3, Armour G, Armour GS, Luxe XR Max 2 and GTX One Pro. The simple rule: match the coil platform to your tank or pod, not the kit name.\u003c\/p\u003e\n\u003cp\u003eIf you are swapping between an iTank-style sub-ohm setup and a pod kit, you will need both GTi and GTX coils on hand.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0302\/7002\/9869\/files\/Vaporesso-GTi-Coils-Specification-3.webp?v=1743757636\" alt=\"Three Vaporesso GTi lattice mesh coils glowing red, sub-ohm DTL replacement coils for iTank 2 and iTank T\"\u003e\u003c\/p\u003e\n\u003ch2\u003eGTi Coil Resistance Guide\u003c\/h2\u003e\n\u003ch3\u003eDTL Coils\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eCoil\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e75-90W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eMax VG, high VG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-75W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh VG, shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm Dual Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-75W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eMax VG, high VG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 0.15 ohm runs hottest and pushes the thickest clouds in the GTi range, but it also chews through e-liquid quickest, so pair it with max VG shortfills and a topped-up tank.\u003c\/p\u003e\n\u003cp\u003e The 0.2 ohm standard is the most popular everyday DTL choice - punchy flavour, plenty of vapour, and a longer lifespan than the 0.15 ohm at typical wattages.\u003c\/p\u003e\n\u003cp\u003e The 0.2 ohm dual mesh sits at the same wattage band as the standard 0.2 ohm but layers two mesh strips for richer vapour density.\u003c\/p\u003e\n\u003cp\u003ePick it if you want extra cloud production without dropping resistance.\u003c\/p\u003e\n\u003ch3\u003eRDL Coils\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eCoil\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.4 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e50-60W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70\/30 VG\/PG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.4 ohm Dual Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e50-60W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70\/30 VG\/PG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.5 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e30-45W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70\/30 VG\/PG\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 0.4 ohm still gives decent vapour with a slightly tighter restricted draw than the DTL options, which makes it the best entry point if you are stepping up from a pod kit and don't want a full open-airflow chest hit.\u003c\/p\u003e\n\u003cp\u003e The 0.4 ohm dual mesh holds the same wattage range as the standard 0.4 ohm but produces noticeably more cloud thanks to the twin mesh layout.\u003c\/p\u003e\n\u003cp\u003eThe 0.5 ohm is the coolest, lowest-wattage option in the GTi range and pairs neatly with restricted DTL pulls on 70\/30 e-liquid - it is the most forgiving coil in the range and tends to last longest between swaps.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0302\/7002\/9869\/files\/Vaporesso-GTi-Coils-Specification-5.webp?v=1743757637\" alt=\"Vaporesso GTi mesh coil resistance grid showing 0.15 ohm 75-90W, 0.2 ohm 60-75W, 0.4 ohm 50-60W and 0.5 ohm 30-40W ranges\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstalling a New GTi Coil\u003c\/h2\u003e\n\u003cp\u003eVaporesso GTi coils use a press-fit design, so swapping coils on the iTank 2 or iTank T takes seconds and no tools. Empty the tank fully if you are changing coil styles or resistances, pull the old coil straight out of the base, and push the new GTi coil firmly into place until it seats with a positive click.\u003c\/p\u003e\n\u003cp\u003e Drop one or two drops of e-liquid onto each visible cotton port on the side of the coil, refill the tank, and screw it back onto your mod. Let the new coil stand upright for 5 to 10 minutes so the wick fully saturates - this step matters most on the 0.15 ohm and 0.2 ohm dual mesh, which run hotter and dry-hit faster if you rush the prime.\u003c\/p\u003e\n\u003cp\u003eStart at the lower end of the printed wattage range and step up gradually until the vape feels right.\u003c\/p\u003e\n\u003ch2\u003eGTi Coil Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eSpec\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Family\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso GTi\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eMesh Type\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eLattice mesh (standard and dual mesh)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistances\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15, 0.2, 0.4, 0.5 ohm standard plus 0.2 and 0.4 ohm dual mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWattage Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e30-90W (varies by resistance)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVaping Style\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSub-ohm DTL and RDL\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eRecommended E-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70\/30 VG\/PG and higher\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCompatible Tanks\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso iTank 2, iTank T\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eInstall\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003ePress-fit, no threading\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003ePack Size\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e5 coils per pack\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x Vaporesso GTi Replacement Coils (in your chosen resistance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVaporesso GTi coils sit within the wider \u003ca title=\"Browse the full Vaporesso replacement coil range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e at Ecigone, alongside \u003ca title=\"Browse Vaporesso replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-pods\"\u003eVaporesso replacement pods\u003c\/a\u003e and the full \u003ca title=\"Browse the complete Vaporesso vape collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther Vaporesso Coils to Consider\u003c\/h2\u003e\n\u003cp\u003eIf your kit is not iTank-based, these adjacent Vaporesso coil ranges may be the right fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX Coils\u003c\/a\u003e for Luxe X3, Armour G, Armour GS and GTX One Pro\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eVaporesso GT Mesh Coils\u003c\/a\u003e for older NRG-series sub-ohm tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VAPORESSO","offers":[{"title":"0.15OHM","offer_id":53607024001362,"sku":"E461201CV01S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"0.2OHM","offer_id":53607024034130,"sku":"E461302CV02S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"0.4OHM","offer_id":53607024066898,"sku":"E461404CV03S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"0.5OHM","offer_id":53607024099666,"sku":"E126605CV04S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"DUAL MESH 0.2OHM","offer_id":53607024132434,"sku":"E39299DM0CV05S","price":8.33,"currency_code":"GBP","in_stock":true},{"title":"DUAL MESH 0.4OHM","offer_id":53607024165202,"sku":"E39300DM0CV06S","price":8.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/2364\/3730\/files\/vaporesso-gti-dual-mesh-coils-02.webp?v=1780180660"},{"product_id":"vaporesso-skrr-coils-qf-mesh-qf-strip","title":"Vaporesso SKRR Coils QF Mesh QF Strip","description":"\u003ch2\u003eVaporesso SKRR QF Coils\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Browse the full Vaporesso vape range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso\u003c\/a\u003e SKRR QF coils are the replacement coils for the Vaporesso SKRR and SKRR-S sub-ohm tanks, the high-wattage tanks that shipped with the legacy Revenger, Revenger X, Polar and original Luxe sub-ohm kits.\u003c\/p\u003e\n\u003cp\u003e Two resistances are available: a 0.15 ohm QF Strip and a 0.2 ohm QF Mesh.\u003c\/p\u003e\n\u003cp\u003eBoth coils run in the 60-90W direct-to-lung wattage range these kits were designed for.\u003c\/p\u003e\n\u003cp\u003eIf your kit has a SKRR or SKRR-S tank screwed on top, these are the correct replacement coils. The original kits are no longer manufactured by Vaporesso, but Ecigone keeps QF coil stock so customers running the original hardware can keep it going. For newer Vaporesso kits like the Luxe X3 or Armour G, see the alternative coil platforms section further down.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Resistance Options\u003c\/strong\u003e - 0.15 ohm QF Strip and 0.2 ohm QF Mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-90W Sub-Ohm DTL\u003c\/strong\u003e - built for the original SKRR \/ SKRR-S wattage window\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Fit Install\u003c\/strong\u003e - plug-and-play swap into the SKRR or SKRR-S tank base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQF Strip Element\u003c\/strong\u003e - even-heating flat strip for a smoother flavour profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQF Mesh Element\u003c\/strong\u003e - larger surface area for denser vapour and brighter flavour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-VG Tuned\u003c\/strong\u003e - pairs best with 70VG or higher \u003ca title=\"Browse 70VG shortfill e-liquids at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeak-Resistant Top Seal\u003c\/strong\u003e - reduces flooding and spitback in the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Coils Per Pack\u003c\/strong\u003e - keep spares on rotation between orders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSKRR Coil Compatibility\u003c\/h2\u003e\n\u003cp\u003eVaporesso SKRR QF coils fit the Vaporesso SKRR and SKRR-S sub-ohm tanks.\u003c\/p\u003e\n\u003cp\u003e If your kit shipped with a SKRR or SKRR-S tank, these coils are the replacement you need.\u003c\/p\u003e\n\u003cp\u003eThey do not fit any of the newer Vaporesso pod platforms such as GTX, GTi or COREX, and they do not fit the older GTR or NRG tanks either - each Vaporesso coil family has its own socket.\u003c\/p\u003e\n\u003ch3\u003eCompatible Tanks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVaporesso SKRR sub-ohm tank\u003c\/li\u003e\n\u003cli\u003eVaporesso SKRR-S sub-ohm tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Kits (Legacy - No Longer Manufactured)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVaporesso Revenger kit\u003c\/li\u003e\n\u003cli\u003eVaporesso Revenger X kit\u003c\/li\u003e\n\u003cli\u003eVaporesso Polar kit\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe kit (original sub-ohm version, not the Luxe X pod kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuick check: unscrew the tank from your mod and look at the coil head. If the threading on the coil matches a QF coil and the tank is engraved SKRR or SKRR-S, these are the correct replacements.\u003c\/p\u003e\n\u003ch2\u003eQF Strip vs QF Mesh Coils\u003c\/h2\u003e\n\u003cp\u003eBoth coils fit the same SKRR and SKRR-S tank, both run in the same 60-90W range, and both work best with high-VG shortfill e-liquid. The difference is in how the heating element is built.\u003c\/p\u003e\n\u003cp\u003eThe 0.15 ohm QF Strip uses a flat strip element that heats evenly along its length. The result is a smoother, more rounded flavour profile and a slightly tighter cloud. It runs a little warmer at the same wattage and tends to be the preferred choice for vapers who want flavour clarity over sheer cloud size.\u003c\/p\u003e\n\u003cp\u003eThe 0.2 ohm QF Mesh uses a wider mesh element with more surface area in contact with the wick. Vapour production is denser and the flavour profile is brighter, especially in the upper half of the wattage range. It is the more cloud-focused of the two coils.\u003c\/p\u003e\n\u003cp\u003eBoth pair best with a 70VG or higher shortfill. Nicotine salts and 50\/50 freebase liquids are too thin for these coils and will wick poorly at this wattage.\u003c\/p\u003e\n\u003ch2\u003eSKRR Coil Resistance Guide\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm QF Strip\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e65-85W (sweet spot approximately 75W)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSmooth, even-heating, balanced flavour\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG+ shortfill, fruit and dessert blends\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm QF Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-80W (sweet spot approximately 70W)\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eDenser vapour, brighter flavour at higher wattage\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG+ shortfill, menthol and fruit blends\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstalling a New SKRR Coil\u003c\/h2\u003e\n\u003cp\u003eUnscrew the tank base from the glass, pull the old coil straight out and press the new coil into the base socket.\u003c\/p\u003e\n\u003cp\u003e Re-attach the glass and fill the tank with your chosen shortfill.\u003c\/p\u003e\n\u003cp\u003e Saturate the wick ports through the side of the coil with a few drops of e-liquid, then stand the tank upright for 5-10 minutes so the cotton wicks through fully.\u003c\/p\u003e\n\u003cp\u003eStart at the lower end of the wattage range, take a few short pulls, then ramp the wattage up to your preferred setting.\u003c\/p\u003e\n\u003ch2\u003eAlternative Coil Platforms\u003c\/h2\u003e\n\u003cp\u003eIf your kit does not use a SKRR or SKRR-S tank, you need a different coil family. Vaporesso has moved on through several coil platforms since the QF range and the newer pod-based kits use their own dedicated coils.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Luxe X3, Armour G, Armour GS and GTX One Pro pod kits: \u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor iTank-based mod kits including the Armour Ultra: \u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eVaporesso GTi Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor the legacy GTR sub-ohm tank: \u003ca title=\"Shop Vaporesso GTR replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtr-replacement-coils\"\u003eVaporesso GTR Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor older NRG-series sub-ohm tanks: \u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eVaporesso GT Mesh Coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTX, GTi and COREX coils are not interchangeable with QF coils and will not fit a SKRR or SKRR-S tank.\u003c\/p\u003e\n\u003ch2\u003eSKRR Coil Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eSpec\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Family\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eQF (SKRR \/ SKRR-S)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistances\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm QF Strip, 0.2 ohm QF Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWattage Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-90W\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVape Style\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSub-ohm direct-to-lung\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eRecommended E-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG or higher shortfill\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCompatible Tanks\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso SKRR, Vaporesso SKRR-S\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eInstall\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003ePress-fit, no threading\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003ePack Size\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e3 coils per pack\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x Vaporesso SKRR QF Replacement Coils (0.15 ohm QF Strip or 0.2 ohm QF Mesh, variant of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVaporesso SKRR QF coils sit within the wider \u003ca title=\"Browse the full Vaporesso replacement coil range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e at Ecigone, alongside \u003ca title=\"Browse Vaporesso replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-pods\"\u003eVaporesso replacement pods\u003c\/a\u003e and the full \u003ca title=\"Browse the complete Vaporesso vape collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther Vaporesso Coils to Consider\u003c\/h2\u003e\n\u003cp\u003eIf your tank is not a SKRR or SKRR-S, these adjacent Vaporesso coil ranges may be the right fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX Coils\u003c\/a\u003e for Luxe X3, Armour G, Armour GS and GTX One Pro\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eVaporesso GTi Coils\u003c\/a\u003e for iTank 2 and iTank T sub-ohm tanks\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eVaporesso GT Mesh Coils\u003c\/a\u003e for older NRG-series sub-ohm tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VAPORESSO","offers":[{"title":"0.15OHM","offer_id":53607225819474,"sku":"E050143CV501S","price":4.16,"currency_code":"GBP","in_stock":true},{"title":"0.2OHM","offer_id":53607225852242,"sku":"E050121CV501S","price":4.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/2364\/3730\/files\/vaporesso-skrr-coils-qf-meshed-qf-strip-0.2-ohm.webp?v=1780182621"},{"product_id":"vaporesso-gt-mesh-replacement-coils","title":"Vaporesso GT Mesh Replacement Coils","description":"\u003ch2\u003eVaporesso GT Mesh Coils\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Browse the full Vaporesso vape range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso\u003c\/a\u003e GT mesh coils are sub-ohm mesh replacement coils for the legacy Vaporesso NRG and NRG SE sub-ohm tanks.\u003c\/p\u003e\n\u003cp\u003e Six variants cover six different wattage and flavour profiles, from the GT2 0.4 ohm at the cooler end through to the GT8 0.15 ohm cloud chaser at 110W.\u003c\/p\u003e\n\u003cp\u003e Mesh heating elements cover more wick surface than traditional wire wraps, which produces fuller flavour and denser vapour from the first puff to the last.\u003c\/p\u003e\n\u003cp\u003eEach three-pack of GT replacement coils uses a press-fit design for tool-free swaps.\u003c\/p\u003e\n\u003cp\u003eGT is one of Vaporesso's older sub-ohm coil platforms - the NRG-series tanks it fits are no longer manufactured, but Ecigone keeps the GT mesh coil range available for vapers still running the original hardware.\u003c\/p\u003e\n\u003cp\u003ePair these coils with 70VG or 80VG \u003ca title=\"Browse 70VG shortfill e-liquids at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e for the best wicking at sub-ohm wattages.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0302\/7002\/9869\/files\/vaporesso-gt-mesh-replacement-coils.webp?v=1758021321\" alt=\"Vaporesso GT mesh replacement coils for NRG and NRG SE sub-ohm tanks shown in three-pack packaging\"\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix GT Variants\u003c\/strong\u003e - GT2, GT4, GT4 Meshed, GT6, GT8 and GT Mesh covering 0.15 to 0.4 ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Heating Element\u003c\/strong\u003e - full-surface heat distribution for richer flavour and longer life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Wattage Range\u003c\/strong\u003e - 30W to 110W depending on coil choice\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Fit Install\u003c\/strong\u003e - push the coil straight into the NRG tank base, no threading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNRG and NRG SE Fit\u003c\/strong\u003e - one coil platform across both tank sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-VG Tuned\u003c\/strong\u003e - 70VG or higher shortfills wick best at sub-ohm wattages\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Coils Per Pack\u003c\/strong\u003e - keep spares on rotation between orders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGT Coil Variants and Wattage Bands\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eCoil\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eBest For\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGT2\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.4 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e40-80W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eBalanced flavour and cloud at mid wattage\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGT4\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e30-70W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSmooth efficient vape at lower wattage\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGT4 Meshed\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-70W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eFocused, consistent mesh flavour\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGT6\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.2 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e40-100W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eWide-range vapers who adjust power on the fly\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGT8\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-110W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eHigh-wattage cloud chasing at full power\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eGT Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.18 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e65-80W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eOriginal mesh coil, balance of flavour density and vapour output\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe GT2 at 0.4 ohm is the most forgiving on e-liquid consumption and battery life, suiting 60\/40 or 70\/30 mixes at moderate wattage.\u003c\/p\u003e\n\u003cp\u003e The GT6 at 0.2 ohm is the all-rounder - it performs at lower wattages for restricted DTL pulls and ramps up cleanly to 100W when you want bigger clouds.\u003c\/p\u003e\n\u003cp\u003eGT8 at 0.15 ohm only really earns its place above 60W and is best paired with max-VG shortfills.\u003c\/p\u003e\n\u003ch2\u003eGT Coil Compatibility\u003c\/h2\u003e\n\u003cp\u003eVaporesso GT mesh replacement coils fit all NRG-series sub-ohm tanks.\u003c\/p\u003e\n\u003cp\u003e Compatible tanks include the NRG sub-ohm tank, the NRG SE sub-ohm tank, and the smaller NRG Mini tank.\u003c\/p\u003e\n\u003cp\u003e These tanks shipped with the original Vaporesso Luxe sub-ohm kit (not the Luxe X pod kit), the Swag 2, Revenger, Polar and Cascade kits.\u003c\/p\u003e\n\u003cp\u003eThe NRG SE tank uses the same coil socket as the full-size NRG, so one coil type covers your whole NRG collection.\u003c\/p\u003e\n\u003ch3\u003eCompatible Tanks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVaporesso NRG sub-ohm tank\u003c\/li\u003e\n\u003cli\u003eVaporesso NRG SE sub-ohm tank\u003c\/li\u003e\n\u003cli\u003eVaporesso NRG Mini sub-ohm tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot Compatible With\u003c\/h3\u003e\n\u003cp\u003eGT mesh coils do not fit any current Vaporesso pod kit or current sub-ohm tank. If your kit has integrated coils inside the pod, you are on the COREX platform. If your tank is engraved iTank, iTank T, GTR, SKRR or SKRR-S, you need a different coil family.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Shop the Vaporesso iTank T sub-ohm vape tank at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-itank-t-sub-ohm-tank\"\u003eiTank T\u003c\/a\u003e \/ iTank 2 - use \u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eGTi coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli\u003eLuxe X3, Armour G, Armour GS, GTX One Pro - use \u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eGTX coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli\u003eGTR tank - use \u003ca title=\"Shop Vaporesso GTR replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtr-replacement-coils\"\u003eGTR coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli\u003eSKRR or SKRR-S - use \u003ca title=\"Shop Vaporesso SKRR QF coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-skrr-coils-qf-mesh-qf-strip\"\u003eSKRR QF coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstalling a New GT Coil\u003c\/h2\u003e\n\u003cp\u003eDrain the tank if you are changing coil styles or resistances, unscrew the tank base, and pull the old coil straight out. Press the new coil firmly into the base socket until it seats.\u003c\/p\u003e\n\u003cp\u003e Drop two or three drops of e-liquid onto each visible cotton port on the side of the coil, refill the tank, and stand it upright for five minutes so the wick fully soaks. Priming the cotton prevents dry hits on your first few puffs.\u003c\/p\u003e\n\u003cp\u003eOnce the five minutes are up, start at the lower end of the printed wattage range and work upwards over a few draws.\u003c\/p\u003e\n\u003ch2\u003eGT Coil Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eSpec\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Family\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso GT\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVariants\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eGT2, GT4, GT4 Meshed, GT6, GT8, GT Mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistance Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 to 0.4 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWattage Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e30-110W (varies by coil)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Element\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eMesh\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVaping Style\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSub-ohm DTL\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eRecommended E-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG or higher shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCompatible Tanks\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso NRG, NRG SE, NRG Mini\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eInstall\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003ePress-fit, no threading\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003ePack Size\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e3 coils per pack\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x Vaporesso GT Replacement Coils (in your chosen variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVaporesso GT mesh coils sit within the wider \u003ca title=\"Browse the full Vaporesso replacement coil range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e at Ecigone, alongside \u003ca title=\"Browse Vaporesso replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-pods\"\u003eVaporesso replacement pods\u003c\/a\u003e and the full \u003ca title=\"Browse the complete Vaporesso vape collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther Vaporesso Coils to Consider\u003c\/h2\u003e\n\u003cp\u003eIf your tank is not an NRG, these adjacent Vaporesso coil ranges may be the right fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eVaporesso GTi Coils\u003c\/a\u003e for iTank 2 and iTank T sub-ohm tanks\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eVaporesso GTX Coils\u003c\/a\u003e for Luxe X3, Armour G, Armour GS and GTX One Pro\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso GTR replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtr-replacement-coils\"\u003eVaporesso GTR Coils\u003c\/a\u003e for the legacy GTR tank\u003c\/li\u003e\n\u003cli role=\"presentation\"\u003e\n\u003ca title=\"Shop Vaporesso SKRR QF coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-skrr-coils-qf-mesh-qf-strip\"\u003eVaporesso SKRR QF Coils\u003c\/a\u003e for SKRR and SKRR-S tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VAPORESSO","offers":[{"title":"GT4 MESHED 0.15ohm","offer_id":53607337787730,"sku":"E12792632CD1953S","price":6.74,"currency_code":"GBP","in_stock":true},{"title":"GT MESH 0.18ohm","offer_id":53607337820498,"sku":"E12792633CD1953S","price":6.74,"currency_code":"GBP","in_stock":true},{"title":"GT2 0.4ohm","offer_id":53607337853266,"sku":"E12792634CD1954S","price":5.24,"currency_code":"GBP","in_stock":true},{"title":"GT4 0.15ohm","offer_id":53607337886034,"sku":"E12792635CD1955S","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"GT6 0.2ohm","offer_id":53607337918802,"sku":"E12792636CD1956S","price":6.74,"currency_code":"GBP","in_stock":true},{"title":"GT8 0.15ohm","offer_id":53607337951570,"sku":"E12792637CV1960S","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/2364\/3730\/files\/vaporesso-gt-mesh-replacement-coils.webp?v=1780183896"},{"product_id":"vaporesso-gtr-replacement-coils","title":"Vaporesso GTR Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso GTR Replacement Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso GTR coils are sub-ohm mesh replacement coils built for the legacy Vaporesso GTR sub-ohm tank. Two resistances are available: a 0.15 ohm head for warmer, denser vapour at higher wattages, and a 0.4 ohm head for a tighter restricted direct-to-lung pull. Both coils use a mesh element instead of a traditional wire wrap, which spreads heat evenly across the cotton wick for richer flavour and longer coil life from each replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTR is one of \u003ca title=\"Browse the full Vaporesso vape range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso's\u003c\/a\u003e older sub-ohm coil platforms, predating GTi and GTX. The GTR tank itself is no longer manufactured, but Ecigone keeps the GTR coil range available for vapers still running the original hardware. Pair these coils with 70VG or 80VG \u003ca title=\"Browse 70VG shortfill e-liquids at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e for the best wicking and flavour at sub-ohm wattages.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eMesh Coil Build\u003c\/strong\u003e - even heating across the full coil surface for richer flavour and longer life\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.15 ohm Head\u003c\/strong\u003e - high-wattage sub-ohm coil for warm vapour and bigger clouds\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.4 ohm Head\u003c\/strong\u003e - tighter restricted DTL draw for flavour-led vapers\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003ePress-Fit Install\u003c\/strong\u003e - push the coil into the tank base, no threading required\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eHigh-VG Ready\u003c\/strong\u003e - built for 70\/30 and 80\/20 shortfills\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAuthentic Vaporesso\u003c\/strong\u003e - genuine coils for proper flavour and wicking\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e3 Coils Per Pack\u003c\/strong\u003e - keep spares on rotation between orders\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGTR Coil Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso GTR coils are designed specifically for the Vaporesso GTR sub-ohm tank that shipped with legacy Vaporesso sub-ohm kits. They are not interchangeable with any of the newer Vaporesso coil platforms - GTX, GTi, COREX and QF all use different sockets and resistance ranges.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQuick check: unscrew the tank from your mod, look at the base of the tank where the coil sits. If the tank is engraved \"GTR\" and the coil head matches the press-fit GTR socket, these are the correct replacements. If your tank is engraved iTank, iTank T, NRG, SKRR, SKRR-S or anything else, you need a different coil platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNot Compatible With\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eiTank 2 \/ \u003ca title=\"Shop the Vaporesso iTank T sub-ohm vape tank at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-itank-t-sub-ohm-tank\"\u003eiTank T\u003c\/a\u003e - use \u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003eGTi coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eLuxe X3, Armour G, Armour GS, GTX One Pro - use \u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003eGTX coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eXROS family \/ Luxe X COREX 2.0 - those use integrated COREX coils built into the pod, not replacement coil heads\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eSKRR or SKRR-S - use \u003ca title=\"Shop Vaporesso SKRR QF Mesh and QF Strip coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-skrr-coils-qf-mesh-qf-strip\"\u003eSKRR QF coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003eNRG \/ NRG SE - use \u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003eGT Mesh coils\u003c\/a\u003e instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGTR Coil Resistance Guide\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eResistance\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eE-Liquid\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e60-80W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSub-ohm DTL, warmer cloud\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG or higher shortfill\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e0.4 ohm mesh\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e40-60W\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eRestricted DTL, flavour-led\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG or higher shortfill\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.15 ohm GTR runs warmer and produces denser clouds at 60-80W. It chews through e-liquid faster, so keep the tank topped up. The 0.4 ohm GTR is the cooler, tighter coil in the range - better suited to vapers who want a more focused flavour profile and longer coil life from each pack.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstalling a New GTR Coil\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDrain the GTR tank if you are changing resistance, unscrew the tank base, and pull the old coil straight out. Press the new coil firmly into the base socket until it seats. Drop two or three drops of e-liquid onto the visible cotton ports on the side of the coil, refill the tank, and stand it upright for five to ten minutes so the wick saturates. Start at the lower end of the wattage range and work upwards. A short break-in at lower wattage gives the coil a longer life and a cleaner flavour from the first puff.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGTR Coil Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eSpec\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Family\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso GTR\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCoil Type\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eMesh, sub-ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eResistances\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e0.15 ohm, 0.4 ohm\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eWattage Range\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e40-80W (varies by resistance)\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eVaping Style\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eSub-ohm DTL\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eRecommended E-Liquid\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e70VG or higher shortfills\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eCompatible Tank\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003eVaporesso GTR sub-ohm tank\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003eInstall\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003ePress-fit, no threading\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp\u003ePack Size\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp\u003e3 coils per pack\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e3x Vaporesso GTR Replacement Coils (in your chosen resistance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso GTR coils sit within the wider \u003ca title=\"Browse the full Vaporesso replacement coil range at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-coils\"\u003eVaporesso coil range\u003c\/a\u003e at Ecigone, alongside \u003ca title=\"Browse Vaporesso replacement pods at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso-pods\"\u003eVaporesso replacement pods\u003c\/a\u003e and the full \u003ca title=\"Browse the complete Vaporesso vape collection at Ecigone\" href=\"https:\/\/ecigone.co.uk\/collections\/vaporesso\"\u003eVaporesso collection\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOther Vaporesso Coils to Consider\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your tank is not a GTR, these adjacent Vaporesso coil ranges may be the right fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003ca title=\"Shop Vaporesso GTi replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gti-replacement-coils\"\u003e\u003cspan\u003eVaporesso GTi Coils\u003c\/span\u003e\u003c\/a\u003e for iTank 2 and iTank T sub-ohm tanks\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003ca title=\"Shop Vaporesso GTX replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gtx-coil-5pcs\"\u003e\u003cspan\u003eVaporesso GTX Coils\u003c\/span\u003e\u003c\/a\u003e for current pod kits including Luxe X3, Armour G and GTX One Pro\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003ca title=\"Shop Vaporesso GT Mesh replacement coils at Ecigone\" href=\"https:\/\/ecigone.co.uk\/products\/vaporesso-gt-mesh-replacement-coils\"\u003e\u003cspan\u003eVaporesso GT Mesh Coils\u003c\/span\u003e\u003c\/a\u003e for older NRG-series sub-ohm tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VAPORESSO","offers":[{"title":"GTR 0.15Ω MESH","offer_id":53607499628882,"sku":"E15952637CV2857S-1","price":8.24,"currency_code":"GBP","in_stock":true},{"title":"GTR 0.4Ω MESH","offer_id":53607499661650,"sku":"E15952637CV2857S-2","price":8.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/2364\/3730\/files\/vaporesso-gtr-replacement-coils-coilspods-ecigone-vape-shop-uk-1.png?v=1780185478"}],"url":"https:\/\/www.vapesmoke.co.uk\/collections\/vaporesso-coils.oembed","provider":"Vape Smoke","version":"1.0","type":"link"}