Dojo Blast 30K Pro Vape Kit

The Vaporesso Dojo Blast 30K Pro is the top-of-range Dojo Blast prefilled pod kit, built on a 1200mAh battery with three switchable power modes and an on-device display screen. Every kit ships with two 2ml prefilled pods and two 8ml auto-fill refill containers - 20ml of e-liquid total per pack and up to approximately 30,000 puffs in ECO mode. Sits at the head of the wider Vaporesso Dojo range.

What sets the 30K Pro apart from the smaller Dojo Blast 10K is the upgraded electronics: power-mode switching, the display screen showing live battery and active mode, an upgraded dual-mesh coil, and SSS anti-leak engineering inside the pod chamber. The 30K Pro takes the same 10K pod-and-container format as standard, so a single refill stock supports both devices.

Key Features

• Three Power Modes - ECO, Normal, Power switchable on device.
• On-Device Display Screen - shows live battery and active mode.
• SSS Anti-Leak Engineering - sealed pod chamber, no seep.
• Upgraded Dual Mesh Coil - heated evenly across the inhale.
• 1200mAh Battery, USB Type-C - up to a week per charge in ECO mode.
• Twin Pod + Twin Refill Container - 20ml e-liquid total per pack.
• Up to Approximately 30,000 Puffs - rated maximum in ECO mode.
• Takes the Same Pod as the Dojo Blast 10K - single refill stock.

Three Power Modes: ECO, Normal, Power

The Dojo Blast 30K Pro is the first kit in the Dojo Blast line with switchable power output. The three modes are selectable on the device itself and read live on the display screen:

• ECO Mode - efficient, balanced delivery, rated approximately 30,000 puffs across the 20ml pack.
• Normal Mode - richer flavour, mid-band puff count of approximately 20,000 puffs.
• Power Mode - intense, full-flavour pull, approximately 16,000 puffs. Factory default out of the box.

Power-mode choice is what changes the puff count - the same pack lasts longer on ECO than on Power. The 30,000-puff figure is the rated ECO maximum, not an everyday Power-mode count.

On-Device Display Screen

The display screen sits on the front of the device and shows live battery level and the active power mode (ECO / Normal / Power). The screen removes the guesswork around how much charge is left and which mode the device is currently set to, so the next top-up or mode change can be made by glance rather than memory. The transparent pod above the device handles the e-liquid level read-out visually.

SSS Anti-Leak Engineering

SSS stands for Sealed Silicone Structure - a sealed silicone layer inside the pod chamber that holds e-liquid in place during inhale draw-down and stops seep through the air channels. The result is a pod that does not leak under pocket pressure, in a bag, or when set down at an angle. The same SSS layer is fitted in every Dojo Blast 30K Pro pod sold as a refill, so the anti-leak guarantee carries across the lifespan of the device.

Upgraded Dual Mesh Coil

Every Dojo Blast 30K Pro pod is fitted with an upgraded dual-mesh coil. The dual-mesh layout spreads heat evenly across a wider surface area, so flavour reads cleaner through the full 20ml of the pack and the coil holds up better at higher power-mode draws. The coil is bonded into the pod housing - no separate coil install or replacement is needed.

Pod and Refill Container Format

The Dojo Blast 30K Pro reads a 2ml prefilled pod with a click-on 8ml auto-fill refill container. Two pod-and-container sets sit in the device at once, used in turn until depleted. The same physical pod format is shared across the wider Dojo Blast prefilled line, so single-stock refill buying covers more than one device in the household. Refill packs come from the Dojo Blast 30K Pro refill range.

How to Use the Dojo Blast 30K Pro

The 30K Pro ships ready to vape, only setup beyond charging is fitting the pods:

1. Charge the device with any standard USB Type-C cable until the LED stops flashing.
2. Take the four-piece pack from the box - two prefilled pods plus two matching auto-fill refill containers.
3. Pull the silicone plug from the first pod, click the first refill container firmly onto the top.
4. Slide the assembled pod and container into one of the two slots on the device.
5. Repeat with the second pod-and-container set in the other slot.
6. Use the mode button on the device to set ECO, Normal or Power - the display screen shows the active mode.
7. Wait 2 to 3 minutes for the coils to saturate before the first draw.
8. Pull on the mouthpiece - inhale activation fires the active coil, no fire button needed.
9. The display screen shows live battery and active mode, charge over USB Type-C when low.
10. When both pod-and-container sets are spent, swap to a fresh refill pack.

Available Flavours

This kit is available in 15 flavours across fruit, citrus, menthol, sweet and lemonade profiles, all packaged at 20mg nic salt. Pick a flavour from the selector below.

Each kit comes with two prefilled pods and two matching auto-fill containers in the chosen flavour. Refill packs are available from the 30K Pro refill range.

Vaporesso Dojo Blast 30K Pro Specifications

What's in the Box

• 1 x Vaporesso Dojo Blast 30K Pro device (1200mAh, display screen)
• 2 x 2ml prefilled pods with upgraded dual mesh coil
• 2 x 8ml auto-fill refill containers (20mg nic salt)
• 1 x user manual
• USB Type-C cable not included