Hayati Quokka Pro Refillable Pod Kit

The Hayati Quokka Pro is the flagship of the Quokka series, sitting above the Quokka Elite and Quokka Lite in the lineup. It is a refillable open-system pod kit, which means the pod stays with the device and you fill your own 10ml nic salt or 50/50 shortfill e-liquid.

A 1100mAh built-in battery, 1.47 inch TFT colour screen, four output modes and an adjustable airflow slider sit inside a 77.3g zinc alloy body. Seven colour finishes are stocked, including the signature Quokka Orange. Shoppers also search for it as the Quokka Pro vape, Hayati Quokka pod kit and Quokka Pro kit.

Recharging is over USB-C at 5V/2A, the output runs from 5W to 25W, and the Quokka pods are 2ml side-fill with mesh coils. The kit comes with a 0.6 ohm pod preinstalled and a 0.8 ohm spare. The wider Hayati vape range covers the rest of the brand's prefilled kits and refill hardware.

Key Features at a Glance

• Flagship of the Quokka Series - sits above the Elite and Lite siblings
• 1.47" TFT Colour Screen - live battery percentage, puff counter and mode read-out
• Four Output Modes - Quokka auto-match, Super, Eco and Pure
• 1100mAh Battery - 5V/2A USB-C fast recharge
• 5W to 25W Output - tuned for nic salt and 50/50 e-liquid
• Adjustable Airflow Slider - tight MTL through to looser RDL
• Zinc Alloy Body - 77.3g pocketable build, seven colours
• 0.6 + 0.8 Ohm Pods Included - 2ml refillable side-fill, mesh coils

Four Output Modes Explained

The four modes are what set the Quokka Pro apart from the rest of the Hayati pod kit lineup. Each one is selected on the TFT screen and shifts how the kit reads the coil and meters power.

Quokka Mode is the auto-match default. It reads the resistance of the pod and dials in a sensible wattage so the vape just works without setup. Super Mode pushes output higher for a warmer, denser draw and is best paired with the 0.6 ohm pod. Eco Mode steps the power down to stretch the battery and e-liquid further between charges. Pure Mode flattens the curve for a cleaner, more focused flavour read, which suits a higher-strength nic salt.

The 1.47" TFT Screen and Three-Button Control

The 1.47 inch TFT colour screen sits flush in the front face and shows battery percentage, a live puff counter and the active mode on every draw. The read-out is bright enough to read in daylight and dims down indoors.

Three buttons handle the entire menu. Five clicks to power on or open settings, three clicks to step through output, two clicks to switch between Quokka, Super, Eco and Pure. There is no fire button to hold and no deep menu to scroll, so a mode change takes a couple of seconds at most.

Adjustable Airflow: MTL and RDL

A side-mounted airflow slider runs the inhale from a tight cigarette-style mouth-to-lung pull through to a looser restricted direct-to-lung draw. The slider notches in cleanly so the setting stays where it is set.

Closed gives the tightest MTL pull and pairs well with the 0.8 ohm pod and a 20mg nic salt. Fully open opens the channel for an RDL hit with more vapour and a fuller flavour body. That setting suits the 0.6 ohm pod with a 10mg salt or a 50/50 shortfill. Most vapers settle somewhere in the middle and only nudge it when changing pod or e-liquid.

Setting Up the Quokka Pro

1. Unbox the kit and peel the protective sticker off the preinstalled pod.
2. Pop the pod out, lift the silicone bung on the side and fill with your chosen nic salt or 50/50 e-liquid.
3. Reseat the bung and click the pod back into the kit body.
4. Charge to full over USB-C before the first session.
5. Wait three to five minutes for the mesh coil to prime through.
6. Five clicks to power on, then inhale to vape. Two clicks to switch mode.

The kit takes 5V/2A fast charge over USB-C, so a full top-up from empty is roughly 45 minutes on a standard wall adaptor. The screen shows charge state while plugged in.

Compatible Quokka Refillable Pods

The Quokka Pro takes the full Quokka pod range from 0.6 ohm through to 1.2 ohm. Each pod runs a dual mesh coil and a side-fill port. The 0.6 ohm pod sits warmer for 50/50 e-liquid or a 10mg salt. The 0.8 ohm pod runs cooler and tighter for a 20mg salt. The 1.0 ohm and 1.2 ohm pods drop in for a tighter MTL pull on stronger nic salts.

Spare and replacement pods are stocked in the Quokka replacement pod range. The kit also pairs well with 20mg nic salt e-liquid and 50/50 shortfill, both of which are TPD compliant for UK sale.

Quokka Pro Flavours

The Quokka Pro is sold as hardware only, so flavour comes from whichever 10ml nic salt or 50/50 shortfill is filled into the pod. The 20mg nic salt range is the natural pair for the 0.8 ohm pod and a tighter MTL slider setting.

[FLAVOURS_SECTION]

Quokka Pro vs Elite vs Lite

The Quokka Pro sits at the top of the Quokka family. The Elite is the mid-tier kit with a smaller screen and a simpler mode set. The Lite is the entry-level option without the screen or multi-mode output.

Hayati Quokka Pro Specifications

What's in the Box

• 1 x Hayati Quokka Pro device (1100mAh, 1.47" TFT screen)
• 1 x Quokka 0.6 ohm 2ml refillable pod (preinstalled)
• 1 x Quokka 0.8 ohm 2ml refillable pod (spare)
• 1 x USB-C charging cable
• 1 x User manual