PIXL 8000 Pod Kit

The PIXL 8000 is a prefilled pod vape kit with a boost button on the side and a screen that shows your battery percentage. Inside you've got an 850mAh battery, a 2ml mesh coil pod, and a 10ml refill container. All prefilled with 20mg of nic salt. Approximately 8,000 puffs from each pod set.

Draw on it normally for standard vaping or double-click the side button to switch on boost mode for more vapour and stronger flavour.

Key Features

• 8,000 Puffs approximately per pod and refill container
• Boost Button double-click to toggle stronger flavour and more vapour
• Battery Display screen shows percentage, not just LED colours
• 850mAh Battery lasts a full day on standard mode for most vapers
• Mesh Coil built into every prefilled pod
• Auto-Refill 10ml container feeds the 2ml pod as you vape
• 20mg Nic Salt smooth MTL draw
• Inhale Activated no button needed for normal vaping

Boost Button and How It Works

Double-click the button on the side and the PIXL 8000 switches to boost mode. The fire icon appears on screen to confirm it's active. You get thicker vapour, a warmer draw, and the flavour comes through stronger. Double-click again to turn it off and drop back to normal output.

Some vapers leave boost on all day. Others toggle it for fruity or icy flavours where the extra heat brings out more taste. Boost drains the battery faster than standard mode, so keep an eye on the screen percentage if you're running it regularly.

The fire icon on the display stays lit while boost is active. If you see that icon and don't double-click, tap the button twice to reset it.

Battery and Display Screen

At 850mAh the PIXL 8000 lasts a full day on standard mode for most MTL vapers. Heavier use or constant boost mode shortens that, but USB-C tops it back up quickly. Cable not included.

The screen shows your battery as a percentage rather than coloured LEDs. It updates on every draw and while charging. You also see a small fire icon when boost mode is running. "E2" on screen means the pod isn't detected properly. Pull it out, check the contacts, push it back in. Five quick clicks on the side button locks and unlocks the kit. A lock icon appears on screen when locked.

PIXL 8000 Specifications

PIXL 8000 Flavours

[FLAVOURS_SECTION]

Browse over 20 PIXL 8000 refill pods in the range covering fruity, icy, menthol, and candy options.

Setting Up the PIXL 8000

1. Unbox and remove all protective caps and stickers
2. Press the pod and refill container together until they click
3. Slot the assembled set into the PIXL 8000 kit
4. Wait 2 to 3 minutes for liquid to reach the mesh coil
5. Press the side button five times quickly to unlock
6. Draw on the mouthpiece to start vaping
7. Double-click the side button to turn on boost mode

USB-C cable isn't included. If the display shows low battery out of the box, charge fully before first use.

Why Choose the PIXL 8000

The boost button is the main reason. Most prefilled kits at this puff count give you one power level and that's it. The PIXL 8000 lets you dial up when you want more from a flavour and back off when you don't. The display screen showing actual battery percentage is useful too, especially if you're using boost regularly and want to track how quickly it draws down.

What's in the Box?

• 1x PIXL 8000 Kit (850mAh battery, display screen)
• 1x 2ml Prefilled Pod (mesh coil)
• 1x 10ml Refill Container (20mg nic salt)
• 1x User Manual
• USB-C cable not included